Habe mal was im Netzt gesucht und gefunden zu demThema was einstellen im Router wenn der Filetransfer nicht mehr geht.
Habe hier mal als beispiel die Routerserie von D-Link genommen aber auch bei den anderen Marken ist es gleich
Leider ist es nur in Englisch, aber dafür mit kleinen Bildern recht einfach und verständlich erklärt
______________________________________________________________________________________________________________________________________________________
To use the file transfer feature in ICQ, you will need to configure your router as well as the ICQ software. The screenshots below are of ICQ 2003a.
How can I find the IP address of my computer?
If you are using ICQ Lite, there is not a way to specify the listening ports so all features may not work unless you enable DMZ on your router. Follow the router instructions below but use port 5190 instead of 20000-20019. To change port in the ICQ Lite software, go to Main > Preferences and Security > Connection Settings. Click here to setup your router. Remember to use 5190 instead of 20000-20019.
Setup ICQ:
Step 1 Open your ICQ software and login.
Step 2 Click on Main > Preferences > Connections > Server tab. Verify that the port is 5190. Under Proxy Settings, check Not Using Firewall.
Step 3 Click on the User tab, click Not Using Proxy, click Use the Following TCP Listen Port for incoming event and enter from: 20000 To: 20019.
If you want more than one computer to use ICQ at the same time, open ports 20020 - 20039 on computer#2, 20040-20059 on computer #3, etc and then open these ports on your router to the IP address of the computer (see below).
Step 4 Click OK.
Click on your router below for configuration steps:
For the DI-5xx, DI-6xx, DI-704P (revC), DI-704UP, DI-754, DI-764, DI-774, DI-784, DI-804HV, DI-808HV, and DI-824VUP:
Step 1 Open your web browser and enter the IP address of the router (192.168.0.1). Enter user name (admin) and your password (blank by default).
Step 2 Click on Advanced at the top and then click Applications on the left side.
Step 3 Create a new entry:
Step 4 Click Apply and then Continue to save settings.
Note: If your DI-604 screens do not look like the screenshots above, then you have the European version of the router which D-Link USA does not support.
For the DI-704P (revB) and DI-707P:
Step 1 Open your web browser and enter the IP address of the router (192.168.0.1). Enter user name (admin) and your password (blank by default).
Step 2 Click on Advanced at the top and then click Application on the left side.
Step 3 Create a new entry:
Step 4 Click Apply to save settings.
For the DI-704P (revA), DI-704, DI-707, DI-711, DI-713, and DI-713P:
Step 1 Open your web browser and enter the IP address of the router (192.168.0.1). Enter user name (admin) and your password (blank by default). If there is only 1 box, enter admin.
Step 2 Click on Advanced at the bottom and then click Special App.
Step 3 Create a new entry:
Step 4 Click Save and the click Reboot.
ICQ Filetransfer über Router
-
-
Bei Netgear Routern müsst ihr im Einstellungsmenü
dorthin kommt ihr mit
Http://192.168.0.1
und fals der benutzername und das Passwort nicht geändert wurdeBenutzername: admin
Passwort: passworddann geht ihr unter der Kategorie Advanced in Port Forwarding.
Dann geht ihr dort auf Add Custom Serviceund gibt dort die nötigen ports frei.
je nach dem müsst ihr dieses zweimal machen wenn der Port z.B. sowohl TCP als auch UDP benutzt
das wa ihr nur braucht ist eure Lokale netzwerkip und als was der Port ist UDP= Upload TCP= Download
-
über mein d-link 604 router habe ich keine probleme :ka:
-
welches ICQ benutzt du denn?
Denn bei ICQ Lite bzw ICQ 5 ist bei vielen das prob net aber wenn man Pro hat oder z.B. Trillian oder nen anderen ersatz dafür muss man die freigeben
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!